## Issue
- **openarm_bringup/openarm.launch.py** was launching rviz2 with an
incorrect configuration file.
- The same launch script is intended to execute xacro with a
configurable prefix and support mock hardware. However, these features
were not functioning as the required arguments and plugin initialization
were missing from the xacro files.
## Fix
- Updated the rviz configuration path to the correct file.
- Added the necessary arguments and plugin setup to the relevant xacro
files to enable prefix configuration and mock hardware support.
We are standardizing our software under Apache License 2.0. This PR
replaces existing BSD 3-Clause License with Apache 2.0 in this
repository.
## About Copyright
All commits in this repository are made by Reazon Holdings, Inc.
members, so the copyright has been added as follows.
- `Copyright 2025 Reazon Holdings, Inc.`
```console
$ git shortlog -sn
55 Thomason Zhou
14 thomason
5 takuya kodama
1 Fujimoto Seiji
1 edwin-giang
1 toki
```
## How it was done
We added the new license header directory by directory, with each commit
covering a single directory to make review easier.
To ensure there are no missing files, we ran the following commands.
```
$ grep -RIL --exclude-dir='.git' --exclude='*.stl' "Apache License, Version 2.0" .
./openarm_bringup/README.md
./openarm_bimanual_moveit_config/README.md
./openarm_bimanual_description/urdf/openarm_bimanual.urdf
./.gitignore
./README.md
./openarm_description/urdf/openarm.urdf
./openarm_description/resource/openarm_description
```
The following files are auto-generated.
- openarm_bimanual_description/urdf/openarm_bimanual.urdf
- openarm_description/urdf/openarm.urdf
* Rename openarm_bimanual_teleop to openarm_bimanual_bringup
* Update package descriptions
* Add quickstart link
* Add note to source overlay
* Add test installation step
* Add poses and update default rviz config
* Fix rev1 to match hardware
* Align rev3 with hardware joint limits
* Match hardware joint limits
* Complete with more poses
* Update README.md with moveit2 video
* Add new READMEs in openarm_bringup and openarm_bimanual_moveit_config
* Add octomap note
* Create mujoco_ros2_control package
* Enable Mujoco hardware interface for OpenArm
* Verify connection with ros2_control
* Update actuators to pos/vel
* Add motor after creation
* Tune KD for smoother motion
* Restore realsense camera
* Change camera to be 10 tilt from vertical to match physical model
* Repair urdf to match physical robot
* Checkpoint moveit2_configuration
* Remove collision between camera and pedestal and remove additional ros2_control interfaces for mock
* Enable octomap perception
* Fix base_link to world transform
* Update openarm to support moveit2 bimanual planning with end effectors
* Improve safety of openarm_hardware zero position autocalibration
* Remove openarm_mujoco_ros2_control from moveit2 branch
* Restore sensor functionality
