315 lines
8.4 KiB
C
315 lines
8.4 KiB
C
/* USER CODE BEGIN Header */
|
||
/**
|
||
******************************************************************************
|
||
* @file : main.c
|
||
* @brief : Main program body
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2026 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
*/
|
||
/* USER CODE END Header */
|
||
/* Includes ------------------------------------------------------------------*/
|
||
#include "main.h"
|
||
#include "can.h"
|
||
#include "dma.h"
|
||
#include "i2c.h"
|
||
#include "usart.h"
|
||
#include "gpio.h"
|
||
|
||
/* Private includes ----------------------------------------------------------*/
|
||
/* USER CODE BEGIN Includes */
|
||
#include "AS5600.h"
|
||
#include "log.h"
|
||
#include <stdint.h>
|
||
#include "can_node.h"
|
||
#include "cmd.h"
|
||
#include "flash.h"
|
||
/* USER CODE END Includes */
|
||
|
||
/* Private typedef -----------------------------------------------------------*/
|
||
/* USER CODE BEGIN PTD */
|
||
|
||
/* USER CODE END PTD */
|
||
|
||
/* Private define ------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PD */
|
||
|
||
/* USER CODE END PD */
|
||
|
||
/* Private macro -------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PM */
|
||
|
||
/* USER CODE END PM */
|
||
|
||
/* Private variables ---------------------------------------------------------*/
|
||
|
||
/* USER CODE BEGIN PV */
|
||
extern uint8_t g_debugLevel;
|
||
extern uint8_t g_direction;
|
||
/* USER CODE END PV */
|
||
|
||
/* Private function prototypes -----------------------------------------------*/
|
||
void SystemClock_Config(void);
|
||
/* USER CODE BEGIN PFP */
|
||
|
||
/* USER CODE END PFP */
|
||
|
||
/* Private user code ---------------------------------------------------------*/
|
||
/* USER CODE BEGIN 0 */
|
||
uint8_t can_checksum_calculate(uint8_t *data, uint8_t length)
|
||
{
|
||
uint8_t sum = 0;
|
||
for (uint8_t i = 0; i < length; i++)
|
||
{
|
||
sum += data[i];
|
||
}
|
||
return sum & 0xff;
|
||
}
|
||
|
||
float as5600_velocity(uint16_t a2, uint16_t a1, float dt_s)
|
||
{
|
||
if (dt_s <= 0.0f) return 0.0f;
|
||
|
||
int32_t d = (int32_t)a2 - (int32_t)a1;
|
||
|
||
// AS5600 12bit回绕修正：取最短路径差值
|
||
if (d > 2048) d -= 4096;
|
||
else if (d < -2048) d += 4096;
|
||
|
||
// 返回单位：rps (revolutions per second)
|
||
return ((float)d / 4096.0f) / dt_s;
|
||
}
|
||
/* USER CODE END 0 */
|
||
|
||
/**
|
||
* @brief The application entry point.
|
||
* @retval int
|
||
*/
|
||
int main(void)
|
||
{
|
||
|
||
/* USER CODE BEGIN 1 */
|
||
int status = -1;
|
||
uint16_t angle = 0;
|
||
uint16_t prev_angle = 0;
|
||
uint32_t prev_tick_ms = 0;
|
||
float velocity_deg_s = 0.0f;
|
||
FlashConfig_t *flashConfig = NULL;
|
||
/* USER CODE END 1 */
|
||
|
||
/* MCU Configuration--------------------------------------------------------*/
|
||
|
||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||
HAL_Init();
|
||
|
||
/* USER CODE BEGIN Init */
|
||
|
||
/* USER CODE END Init */
|
||
|
||
/* Configure the system clock */
|
||
SystemClock_Config();
|
||
|
||
/* USER CODE BEGIN SysInit */
|
||
|
||
/* USER CODE END SysInit */
|
||
|
||
/* Initialize all configured peripherals */
|
||
MX_GPIO_Init();
|
||
MX_DMA_Init();
|
||
MX_CAN1_Init();
|
||
MX_I2C2_Init();
|
||
MX_USART1_UART_Init();
|
||
/* USER CODE BEGIN 2 */
|
||
can_node_init();
|
||
init_cmd();
|
||
flashConfig = Flash_ReadConfig();
|
||
_dbg_printf("Current CAN ID: 0x%02X\r\n", flashConfig->can_id);
|
||
_dbg_printf("Current Direction: 0x%02X\r\n", flashConfig->sensorDir);
|
||
_dbg_printf("Current Debug Level: 0x%02X\r\n", flashConfig->debugFlag);
|
||
g_direction = flashConfig->sensorDir;
|
||
g_debugLevel = flashConfig->debugFlag;
|
||
status = -1;
|
||
/* USER CODE END 2 */
|
||
|
||
/* Infinite loop */
|
||
/* USER CODE BEGIN WHILE */
|
||
while (1)
|
||
{
|
||
switch (status)
|
||
{
|
||
case -1:
|
||
if (AS5600_Init() == 0)
|
||
{
|
||
prev_angle = AS5600_GetAngle();
|
||
|
||
status = 0;
|
||
}
|
||
else
|
||
{
|
||
status = -1;
|
||
// _dbg_printf("AS5600 Initialization Failed!\r\n");
|
||
HAL_GPIO_TogglePin(LED_R_GPIO_Port, LED_R_Pin);
|
||
HAL_Delay(100);
|
||
}
|
||
break;
|
||
case 0:
|
||
{
|
||
HAL_GPIO_WritePin(LED_R_GPIO_Port, LED_R_Pin, GPIO_PIN_SET);
|
||
prev_tick_ms = HAL_GetTick();
|
||
angle = AS5600_GetAngle();
|
||
HAL_Delay(10); // 10ms采样周期
|
||
uint32_t now_ms = HAL_GetTick();
|
||
uint32_t dt_ms = now_ms - prev_tick_ms;
|
||
if (dt_ms > 0U)
|
||
{
|
||
velocity_deg_s = as5600_velocity(angle, prev_angle, (float)dt_ms * 0.001f) * 360.0f;
|
||
}
|
||
|
||
prev_angle = angle;
|
||
prev_tick_ms = now_ms;
|
||
if(g_direction > 0)
|
||
{
|
||
// 反转方向
|
||
velocity_deg_s = -velocity_deg_s;
|
||
angle = -angle;
|
||
}
|
||
if(g_debugLevel > 0)
|
||
{
|
||
_dbg_printf("Angle: %u, Vel: %.2f dt: %u ms\r\n", angle, velocity_deg_s, dt_ms);
|
||
}
|
||
HAL_GPIO_TogglePin(LED_G_GPIO_Port, LED_G_Pin);
|
||
status = 1;
|
||
}
|
||
break;
|
||
case 1:
|
||
{
|
||
uint8_t canData[8] = {0};
|
||
int16_t vel_cdeg_s = (int16_t)(velocity_deg_s * 100.0f); // 0.01 deg/s
|
||
int transmitResult = 0;
|
||
|
||
canData[0] = 0xAA; // 头
|
||
canData[1] = (angle >> 8) & 0xFF;
|
||
canData[2] = angle & 0xFF;
|
||
canData[3] = (vel_cdeg_s >> 8) & 0xFF;
|
||
canData[4] = vel_cdeg_s & 0xFF;
|
||
canData[5] = 0x00; // 保留
|
||
canData[6] = 0x00; // 保留
|
||
canData[7] = can_checksum_calculate(canData, 7);
|
||
|
||
transmitResult = can_node_transmit(flashConfig->can_id, canData);
|
||
if (transmitResult != 0)
|
||
{
|
||
status = 2; // 直接进入错误状态，持续闪烁蓝灯
|
||
}
|
||
else
|
||
{
|
||
status = 0;
|
||
HAL_GPIO_WritePin(LED_B_GPIO_Port, LED_B_Pin, GPIO_PIN_SET); //关闭蓝灯
|
||
}
|
||
}
|
||
break;
|
||
case 2:
|
||
HAL_GPIO_TogglePin(LED_B_GPIO_Port, LED_B_Pin);
|
||
// HAL_Delay(100);
|
||
break;
|
||
default:
|
||
break;
|
||
}
|
||
/* USER CODE END WHILE */
|
||
|
||
/* USER CODE BEGIN 3 */
|
||
}
|
||
/* USER CODE END 3 */
|
||
}
|
||
|
||
/**
|
||
* @brief System Clock Configuration
|
||
* @retval None
|
||
*/
|
||
void SystemClock_Config(void)
|
||
{
|
||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||
|
||
/** Configure the main internal regulator output voltage
|
||
*/
|
||
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
/** Initializes the RCC Oscillators according to the specified parameters
|
||
* in the RCC_OscInitTypeDef structure.
|
||
*/
|
||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||
RCC_OscInitStruct.PLL.PLLM = 3;
|
||
RCC_OscInitStruct.PLL.PLLN = 20;
|
||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
|
||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
/** Initializes the CPU, AHB and APB buses clocks
|
||
*/
|
||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||
|
||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
}
|
||
|
||
/* USER CODE BEGIN 4 */
|
||
|
||
/* USER CODE END 4 */
|
||
|
||
/**
|
||
* @brief This function is executed in case of error occurrence.
|
||
* @retval None
|
||
*/
|
||
void Error_Handler(void)
|
||
{
|
||
/* USER CODE BEGIN Error_Handler_Debug */
|
||
/* User can add his own implementation to report the HAL error return state */
|
||
__disable_irq();
|
||
while (1)
|
||
{
|
||
}
|
||
/* USER CODE END Error_Handler_Debug */
|
||
}
|
||
#ifdef USE_FULL_ASSERT
|
||
/**
|
||
* @brief Reports the name of the source file and the source line number
|
||
* where the assert_param error has occurred.
|
||
* @param file: pointer to the source file name
|
||
* @param line: assert_param error line source number
|
||
* @retval None
|
||
*/
|
||
void assert_failed(uint8_t *file, uint32_t line)
|
||
{
|
||
/* USER CODE BEGIN 6 */
|
||
/* User can add his own implementation to report the file name and line number,
|
||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||
/* USER CODE END 6 */
|
||
}
|
||
#endif /* USE_FULL_ASSERT */
|